Search
Leave a Message
Thank you for your message. We will be in touch with you shortly.
Explore Our Properties
Home inspection findings North Texas buyers see most, decade by decade.

Home Inspection Findings North Texas Buyers See Most, Decade by Decade

October 8, 2026

What are the most common home inspection problems in North Texas? Foundation movement shows up in every decade. Beyond that, it depends on the year built: cast iron drains and aluminum wiring in older homes, slab type in some 1990s homes and a panel recall in 2020s builds.

Most of the homes bought and sold across Northeast DFW were built between the 1970s and today. Garland and Richardson have plenty of 1970s and 1980s homes. Sachse, Wylie, Murphy and Rowlett grew fast in the 1990s and 2000s. Lavon, Princeton and Royse City are full of homes built in the last ten years.

Each era has its own inspection pattern. When you know what to expect from the decade a home was built, the inspection report stops being a scary document and starts being a to-do list you can plan and negotiate around.

Every decade: 1. Foundation movement

North Texas clay expands when it's wet and shrinks when it's dry and no decade of construction is immune. Texas inspectors are required to report visible signs of foundation performance issues, including sticking doors, sloping floors and wall or ceiling cracks. Not every crack is a crisis and not every report comment means you need a repair. For how to tell the difference, read Foundations in North Texas: 7 Things That Matter in DFW (and 3 That Don't).

1970s and 1980s: 2. Cast iron drain lines

Many homes from this era have cast iron drain pipes running under the slab. Cast iron corrodes from the inside and can crack or collapse and you can't see it without a camera. A standard Texas home inspection doesn't include one: the rules list sewer cameras as specialized equipment inspectors are not required to use. If you're buying a 1970s or 1980s home, ask about adding a sewer scope during your option period.

Late 1960s to mid-1970s: 3. Aluminum branch wiring

During a copper shortage, some homes were wired with aluminum instead. According to the U.S. Consumer Product Safety Commission, aluminum branch wiring was mainly installed from 1965 to the mid-1970s, and the concern is overheating at connections. The CPSC recommends specific permanent repairs made by a qualified electrician. Texas inspectors are required to check for approved connections when they find aluminum branch conductors.

1970s and 1980s: 4. Federal Pacific Stab-Lok panels

Federal Pacific Electric panels with Stab-Lok breakers still turn up regularly in older North Texas homes. Many inspectors flag them because of long-standing concerns that the breakers may not trip when they should. Some insurance companies ask about them, too. If one shows up on your report, get a licensed electrician's opinion and a replacement quote before your option period ends.

Mid-1990s to early 2000s: 5. Slabs built without post-tension cables

Most North Texas slabs from this era are post-tensioned: steel cables run through the concrete and are tightened after it cures. In the mid-1990s to early 2000s, one builder in the area built some homes without post-tension. That doesn't mean those homes have a problem but it does mean a buyer should know what kind of slab they're buying. Your agent and a structural engineer can help you find out.

2000s and 2010s: 6. Systems reaching the end of their life

Homes built in the 2000s and 2010s are typically structurally solid but their original systems are aging. Roofs, HVAC units and water heaters are the big three. Look at the dates on the equipment not just the inspector's notes and plan for replacements in your budget. For a real example, read What North Texas Homes Built in the 1990s Need Today.

2020 to 2022: 7. Recalled Square D panels

Newer doesn't always mean problem-free. In 2022, Schneider Electric recalled about 1.4 million Square D QO Plug-on-Neutral load centers made from February 2020 through January 2022 because they could overheat. The remedy is a free inspection by a trained electrician with repair or replacement as needed. If you own or are buying a home finished in those years, check the panel.

The takeaway

No house is perfect, and every decade has its weak spots. Knowing the pattern for the year a home was built lets you ask the right questions, add the right specialist inspections and negotiate from facts instead of fear.

FAQ

Does a Texas home inspection include a sewer scope? No. Texas rules don't require inspectors to use cameras inside drain or sewer lines. You can hire a plumber or inspector to add a sewer scope, and it's worth it on older homes.

Is aluminum wiring a deal-breaker? Not necessarily. The U.S. Consumer Product Safety Commission recommends specific permanent repairs by a qualified electrician. Get an evaluation and a quote during your option period.

Should I worry about foundation cracks in a North Texas home? Small cracks are common in North Texas homes. Watch for patterns like doors that stick, sloping floors or cracks that keep growing. When in doubt, a structural engineer's evaluation gives you facts to decide with.

If you found this useful, read these next

Looking at an older home?

If you're buying in Garland, Sachse, Wylie, Murphy or Rowlett, Jeanie Marten Real Estate will help you figure out which specialist inspections the home's decade calls for and how to use the report in negotiation. Call or text 972-414-0719 or email [email protected].

Sources: TREC Inspector Standards of Practice · CPSC, Repairing Aluminum Wiring · CPSC, Square D QO Plug-on-Neutral Recall

Follow Us On Instagram